DIY & HARDWARE
Model: 155079
• head: pan head, phillips compatible drive• finish: zinc plated• pan head has a flat under head surface allowing the screw to lay flat..
€4.75
Ex Tax:€3.86
Model: 155093
• double slotted roofing bolt complete with square nut• finish: zinc Plated• fully threaded• low profile cross slotted mushroom head• clearance hole size is usually 1mm more than the bolt diameter• suitable for both interior and exterior use• can be used on many DIY projects other than roofing..
€4.50
Ex Tax:€3.66
Model: 155078
• head: pan head, phillips compatible drive• finish: zinc plated• pan head has a flat under head surface allowing the screw to lay flat..
€4.25
Ex Tax:€3.46
Model: 155041
• specially designed self-tapping masonry fixing• zinc yellow passivated• virtually stress free, allowing close to edge applications• torx compatible head screw for increased torque control• high load capacity with interlocking thread into base material• through fixing, eliminating the need for mark..
€4.25
Ex Tax:€3.46
Model: 155026
• head: hexagon head, single thread• zinc plated• used predominantly when fixing to timber in many fencing and joinery applications• hexagon head for use with socket drivers• widely used in conjuction with nylon wall plugs..
€4.25
Ex Tax:€3.46
Model: 155101
• cavity wall anchor • nylon speed plug• supplied with pozidrive compatible 4.5x35mm round head screws• specially designed cutting tip to pierce plasterboard skin• nylon speed plugs can be used in electrical installations• screw and fixture can be removed for cleaning and decoration• ideal when re-f..
€3.99
Ex Tax:€3.24
Model: 155036
• head: hexagon head, single thread• zinc plated• used predominantly when fixing to timber in many fencing and joinery applications• hexagon head for use with socket drivers• widely used in conjuction with nylon wall plugs..
€3.99
Ex Tax:€3.24
Model: 155021
• carriage bolts complete with hexagon nut• zinc plated• conforms to DIN603 (bolt) and DIN934 (nut) standards• fully threaded up to 100mm• also known as coach bolts or cup square hex bolts• square section underneath dome head stops rotation of the bolt when tightened• mainly used in joining timber t..
€3.99
Ex Tax:€3.24
Model: 124199
The on/off button is located on the base of the torch.
It requires 3 x AAA batteries which are supplied.CE Approved..
€3.99
Ex Tax:€3.24
Model: 155035
• head: hexagon head, single thread• zinc plated• used predominantly when fixing to timber in many fencing and joinery applications• hexagon head for use with socket drivers• widely used in conjuction with nylon wall plugs..
€3.99
Ex Tax:€3.24
Model: 155027
• head: hexagon head, single thread• zinc plated• used predominantly when fixing to timber in many fencing and joinery applications• hexagon head for use with socket drivers• widely used in conjuction with nylon wall plugs..
€3.99
Ex Tax:€3.24
Model: 155082
• cavity wall anchors• all steel heat resistant fixing for plasterboard• supplied with universal cross pan head machine screws• zinc plated• suitable for heavy duty fixing applications such as radiators and wall units• anti-rotation teeth pierce the base skin to ensure firm anchorage• screw and fixi..
€3.75
Ex Tax:€3.05
Model: 155040
• specially designed self-tapping masonry fixing• zinc yellow passivated• virtually stress free, allowing close to edge applications• torx compatible head screw for increased torque control• high load capacity with interlocking thread into base material• through fixing, eliminating the need for mark..
€3.75
Ex Tax:€3.05
Model: 155034
• head: hexagon head, single thread• zinc plated• used predominantly when fixing to timber in many fencing and joinery applications• hexagon head for use with socket drivers• widely used in conjuction with nylon wall plugs..
€3.75
Ex Tax:€3.05
Model: 155025
• head: hexagon head, single thread• zinc plated• used predominantly when fixing to timber in many fencing and joinery applications• hexagon head for use with socket drivers• widely used in conjuction with nylon wall plugs..
€3.75
Ex Tax:€3.05
Model: 155116
• form B (light duty)• mild steel• zinc plated• wide range of sizes to suit most applications• bright zinc plated for increased corrosion resistance• manufactured to Din125A and BS4320 standards• main purpose of washers is to distribute the load under a bolt head or nut face..
€3.25
Ex Tax:€2.64
Model: 155081
• cavity wall anchors• all steel heat resistant fixing for plasterboard• supplied with universal cross pan head machine screws• zinc plated• suitable for heavy duty fixing applications such as radiators and wall units• anti-rotation teeth pierce the base skin to ensure firm anchorage• screw and fixi..
€3.25
Ex Tax:€2.64
Model: 88279
The Safeline Shogun Green Palm Gloves are a polyester and cotton knit wrist glove with natural latex coating. The green grip glove is a flexible and robust glove offering great dexterity and good resistance to tearing. These gloves are comfortable to wear and have a rough green natural rubber coatin..
€2.99
Ex Tax:€2.43
Model: 76387
Steel Cup Hook made from steel and has a plastic coating, can help organise and hang mugs, cups, and other items in your kitchen...
€2.99
Ex Tax:€2.43
Model: 155039
• specially designed self-tapping masonry fixing• zinc yellow passivated• virtually stress free, allowing close to edge applications• torx compatible head screw for increased torque control• high load capacity with interlocking thread into base material• through fixing, eliminating the need for mark..
€2.99
Ex Tax:€2.43
Model: 155018
• carriage bolts complete with hexagon nut• zinc plated• conforms to DIN603 (bolt) and DIN934 (nut) standards• fully threaded up to 100mm• also known as coach bolts or cup square hex bolts• square section underneath dome head stops rotation of the bolt when tightened• mainly used in joining timber t..
€2.99
Ex Tax:€2.43
Model: 155077
• head: pan head, phillips compatible drive• finish: zinc plated• pan head has a flat under head surface allowing the screw to lay flat..
€2.99
Ex Tax:€2.43
Model: 155114
• form B (light duty)• mild steel• zinc plated• wide range of sizes to suit most applications• bright zinc plated for increased corrosion resistance• manufactured to DIN125A and BS4320 standards• main purpose of washers is to distribute the load under a bolt head or nut face..
€2.75
Ex Tax:€2.24
Model: 155037
• head: hexagon head, single thread• zinc plated• used predominantly when fixing to timber in many fencing and joinery applications• hexagon head for use with socket drivers• widely used in conjuction with nylon wall plugs..
€2.65
Ex Tax:€2.15
Model: 155030
• head: hexagon head, single thread• zinc plated• used predominantly when fixing to timber in many fencing and joinery applications• hexagon head for use with socket drivers• widely used in conjuction with nylon wall plugs..
€2.65
Ex Tax:€2.15
Model: 155033
• head: hexagon head, single thread• zinc plated• used predominantly when fixing to timber in many fencing and joinery applications• hexagon head for use with socket drivers• widely used in conjuction with nylon wall plugs..
€2.50
Ex Tax:€2.03
Model: 155115
• form B (light duty)• mild steel• zinc plated• wide range of sizes to suit most applications• bright zinc plated for increased corrosion resistance• manufactured to Din125A and BS4320 standards• main purpose of washers is to distribute the load under a bolt head or nut face..
€2.25
Ex Tax:€1.83
Model: 160097
The Topline Eco Sustainable Bag 4 Life is produced from Recycled Polyethylene Terephthalate (rPet) which is a reusable and sustainable material. Featuring piped seams and a reinforced base fitted with 400gsm cardboard for added strength and durability. Endorsed with the Guaranteed Irish logo.
Manuf..
€2.00
Ex Tax:€1.63
Model: 157052
• pre-assembled for quick, easy and repetitive installation• grey nylon plug, zinc Yellow Passivated Screw Nail• quick and easy to install using a hammer for final fix• pozidrive compatible screw head for easy release if required• strong grip in solid substrates• through fixing, eliminating the need..
€1.99
Ex Tax:€1.62
Model: 155032
• head: hexagon head, single thread• zinc plated• used predominantly when fixing to timber in many fencing and joinery applications• hexagon head for use with socket drivers• widely used in conjuction with nylon wall plugs..
€1.99
Ex Tax:€1.62
Model: 155121
• mild steel• bright zinc plated for increased corrosion resistance• purpose is to distribute the load under a bolt head or nut face• 25mm outside diameter..
€1.75
Ex Tax:€1.42
Model: 155120
• mild steel• bright zinc plated for increased corrosion resistance• purpose is to distribute the load under a bolt head or nut face• 25mm outside diameter..
€1.75
Ex Tax:€1.42
Model: 155119
• mild steel• bright zinc plated for increased corrosion resistance• purpose is to distribute the load under a bolt head or nut face• 25mm outside diameter..
€1.75
Ex Tax:€1.42
Model: 155118
• mild steel• bright zinc plated for increased corrosion resistance• purpose is to distribute the load under a bolt head or nut face• 25mm outside diameter..
€1.75
Ex Tax:€1.42
Model: 155117
• mild steel• bright zinc plated for increased corrosion resistance• purpose is to distribute the load under a bolt head or nut face• 25mm outside diameter..
€1.75
Ex Tax:€1.42
Model: 124143
Designed to be as easy to use as possible, the Purismio Protective Face Mask is perfect for keeping airborne droplets, dust, air particles and pollution away as your breathing.
Can be washed up to 60 times before expiring.
Product Features
Completely Reusable
Just wash at 70 degrees or soak in bo..
€0.50 €10.00
Ex Tax:€0.41
Model: 202033
The Makita DLX2131MJ1 twin kit from Makita replaces the DLX2012 twin kit. It includes models DHP482 and DTD152 with 3 x 4.0ah lithium-ion batteries.
The DHP482 18v LXT combi drill features an all-metal gear construction for extra high transmission durability as well as an electric brake and variabl..
€499.00
Ex Tax:€405.69
Model: 202032
Technical Data:- Capacity In Steel: 13mm- Capacity In Wood: 38mm- Chuck Capacity: 1.5 - 13mm- Capacity In Masonry: 13mm- Blows Per Minute: (hi)- Ipm 0 - 28,500 Ipm- Blows Per Minute: (lo) - Ipm 0 - 9,000 Ipm- No Load Speed: (hi) 0 - 1,900 Rpm- No Load Speed: (lo) 0 - 600 Rpm- Voltage: 18v- Torque Se..
€326.30
Ex Tax:€265.28
Model: 98464
The DEWALT DCS575 XR Flexvolt Circular Saw is ideal for general purpose ripping, cross-cutting and bevelling in wood and other construction materials. The high torque motor provides increased durability and power when cutting job site and joinery materials.
It has a stable block construction for low..
€319.99
Ex Tax:€260.15
Model: 202014
The Bahco S95 1/4in & 1/2in Drive Socket Set contains a selection of sockets made from high-performance alloy steel with a matt finish. The Dynamic Drive™ profile protects the sockets from wear and damage. Supplied in an oil and temperature resistant polypropylene case with three sections. Contains:..
€309.99
Ex Tax:€252.02
Model: 108531
TABLE SAW Voltage Frequency:230V-50HZ
Input Power:S1:1800W,S2:2000W
No Load Speed:5000RPM
BLADE:255MM*15.9*2.8mm 40T
Blade tilting range:0?-45?
MAX CUTTING CAPACITY:85MM(900) 65MM(450)
TABLE SIZE:563*583*28MM
Max. cutting capacity on the left:497mm
Max. cutting capacity on the right:396mm
..
€299.99
Ex Tax:€243.89
Model: 202034
Set Contains- Makita Dhp453zw Combi Drill,- Makita Dtd146zw Impact Driver,- 2x 3ah Batteries,- Charger & Carry Case..
€279.99 €279.99
Ex Tax:€227.63
Brand: CAT
Model: 97085
Features
High performance Cordless Circular Saw with Cat latest Outer Rotor Brushless motor provides impressive power for heavy duty construction applications with great cutting efficiency.
Intelligence PCM system delivers advanced digital overload protection and enhances working performance and..
€219.99
Ex Tax:€178.85
Model: 101616
Dewalt DCS380N Premium XR Reciprocating Saw 18V Bare Unit
The DEWALT DCS380 XR Premium Reciprocating Saw has a powerful fan cooled motor and high performance reciprocating mechanism. The high performance reciprocating mechanism and lightweight magnesium gearcase offer the user optimised power ..
€199.00
Ex Tax:€161.79
Model: 101615
It delivers up to 7,000 rotations per minute for fast cutting and grinding applications. The steel cut spiral bevel gears provide the highest level of durability and low vibration.
Powerful fan cooled motor, intelligent variable speed trigger, lock-off switch
Replaceable brushes
Low profile jam pot..
€179.99
Ex Tax:€146.33
Model: 89629
Self-levelling cross line laser is accurate to ±0.3 mm/m in levelling applications
Self-Levelling up to 4 degrees surface angle with automatic out of level indication, marks a levelled line in seconds
2 button operation and low battery indication for ease of use
Built in magnetic pivot bracket mount..
€169.99
Ex Tax:€138.20
Brand: CAT
Model: 97084
High powered Cordless Reciprocating Saw for heavy duty construction applications.
Equipped with Cat latest Brushless motor provides impressive power and great cutting efficiency.
Intelligence PCM system delivers advanced digital overload protection and enhances working performance and maximum run t..
€159.99
Ex Tax:€130.07
Brand: CAT
Model: 97083
Both efficient and accurate cutting cordless.
Jigsaw with Cat latest Brushless motor and intelligence PCM system delivers advanced digital overload protection and enhances working performance and maximum run time.
26mm stroke length for controlled cutting with stroke rate OF 3500/min.
Featured T..
€159.99
Ex Tax:€130.07
Model: 91676
The Bahco S240 1/2in Drive Socket Set contains sockets made from high performance alloy steel. With a Dynamic Drive™ profile to protect the sockets from wear and damage. Supplied in an oil and temperature resistant polypropylene case. Conforms to DIN 3120 / ISO 1174.
Contains:
18 x 1/2in Hex Sockets..
€149.99
Ex Tax:€121.94
Model: 30981
The Batavia 18V One-Handed Nexxsaw Chainsaw is ideal for pruning. Its head can be rotated between 0°-32°. Use the 0° straight setting when you are working above your head, pruning higher branches. The 32° is perfect for when you are working in front of you, sawing downwards.
Its compact design incor..
€149.99
Ex Tax:€121.94
Model: 85231
The RS Pro Fibreglass Step Ladder has robust reinforced stiles that make it extremely durable and prevent it from conducting electricity. Being a swingback step ladder one side features non-slip treads, which are double riveted for safety. The RS Pro ladder has a 150kg static load rating since it co..
€145.00
Ex Tax:€117.89
